1
1
2
1
2
3
4
5
3 sec.
Turn off tap
- Close water supply
- Clean the machine
- Unplug machine
Additional Steps
- Turn the machine off
- Leave door open to
allow drum to dry
Remove laundry
-
Open the door
- Remove the laundry
2
Loading the Drum
Check the folds of the flexible gasket (grey) -
and remove any small articles or foreign objects that may have
fallen from items in the previous wash .
Check all garments for loose items before loading and ensure that
clothes are clear of the door gasket before closing the door so that
the clothes or door gasket are not damaged during the wash.
4 additional programs
Time Delay / Favorite / Intensive / Medic Rinse
INSERT PLUS INTO THE MAINS SOCKET
Never touch the plug with wet hands!
Never remove the plug from the
socket by pulling on the cord.
HANG UP WASTE WATER HOSE
Hose elbow connection e.g. attach to water tap
WATER CONNECTION
Turn on the water tap
CHECKING THE MACHINE
Never use a defective machine! In case of any
failure, first unplug the machine and turn off the
water tap.
DOING LAUNDRY AND USING MACHINE
WITH CARE
- empty all pockets
- remove all metal parts
- place the delicate textiles into the laundry net
- close zippers
WATER TREATMENT
- with hardness III water
- use water softening agent
DRUM CARE
- remove extraneous objects
- leave door open to dry the drum
- check the rubber seals regularly
ECOLOGICAL WASHING
- make use of the max. washing quantity
- do not “pre wash” if possible
- use short program if possible
LAUNDRY WITH DIFFERENT AMOUNTS OF
SOILING
- wash new textiles separately
- do not prewash
- pretreat dirty spots
- pre wash
Preparation
lightly
heavily
Sort the laundry
note washing instruction symbols -
Degree of soiling -
Type of textile / colour -
3
B
A
C
Fill detergent
Refer to the
written information
on the detergent's packaging
Turn the machine ON
by pressing the Power button
Select a
Program
B
Main Wash
For Laundry requiring detergent, place
recommended dosage in to this compart-
ment. Please note that liquid detergent
will enter the tub as it is poured and may
not be suitable for a delay start.
C
Softener
Do not exceed the MAX-Level.
Highly densed softeners are to be
diluted with some water.
Excessive softener can cause brown
or grey spotting on the clothes.
A
Pre Wash
The Pre wash compartment can be used
for Normal to heavy soiled clothes, by add-
ing a prewash or normal detergent to this
compartment before selecting this wash
option with the Cycle.
Dry fl at
Do not bleach
Handy to bleach
Do not tumble dry
Hang to dry
Drip dry
Medium hot ironing
Hot ironing
Do not iron
Washing temperature
Do not wash
Luke warm ironing
Time Delay
Allows you to set the cycle's ending time (by hourly increments) in advance.
How to set “Time Delay”
- Press
Power
button.
- Turn the
Program
dial to select the program you require.
- Press
Time Delay
button and set the finishing time. The machine will then automatically work
out the turn on time based on the chosen cycle.
- Press the
Start/Pause
button.
Favorite
- Favorite program allows you to store a customized wash cycle for future use.
- To make a Favorite program:
(1) Select a cycle.
(2) Select
The course, washing method, number of rinses, spin speed, water temperature etc.
(3) Press and hold Favorite program button 3 econds (2 beep sounds).
The Favorite program is now stored for future use.
To reuse the program, select Favorite program and press Start/Pause.
Intensive
If the laundry is heavily soiled “Intensive”option is effective.
- By selecting the Intensive option, the washing duration may be extended, depending on
the program selected.
- To use this option, press the intensive button once before the wash program is started.
Medic Rinse
For best results or for cleaner rinsing, select the “Medic Rinse” option.
This allows the final rinse to be heated to 40 degrees.
Available in the Cotton, Cotton Quick, Synthetic, Baby Care and Wash+Dry (4kg/4kg) programs.
Medic Rinse is set by default in the Baby Care program.
The respective temperature indicator will light up.
Drying cycle
Temperature
Spin
Options
Start / Pause
Program Cycle
Power button
Drum
Dispenser
drawer
Filter cover.
Control panel
Washing program table
Additional programs
Washing symbols
Dispenser drawer
Display
Additional programs
Warning:
Keep all washing powder and detergents away from children. Danger of poisoning
Program
Fabric Type
Water Temp.
(Option)
Dry (Option) Maximum Load
Cotton
Wash+Dry
(4kg/4kg)
Cotton
Quick
Synthetic
Delicate
Color fast garments (shirts,
nightdresses, pajamas...)and lightly
soiled white cotton (underwear)
Lightly soiled clothing and
small loads
A small amount of laundry
which can be dried.
Polyamide, Acrylic, Polyester
Baby Care
Lightly soiled baby wear
Delicate laundry easily
damaged
“Hand wash” marked delicate
and wool laundry
60°C
(Cold, 30°C,
40°C, 95°C)
60°C
(Cold, 30°C,
40°C, 95°C)
40°C
(Cold, 30°C,
60°C)
60°C
(40°C, 95°C)
Duvet
Cotton bedding with fi lling
duvet, pillow, blanket, sofa
cover with light fi lling
40°C
(Cold, 30°C)
30°C
(Cold, 40°C)
Quick 30
Colored laundry which is
lightly soiled fast
- Time Delay
- Intensive
- Medic Rinse
- Pre Wash
- Rinse+
- Rinse+Spin
- Hold
- Time Delay
- Intensive
- Medic Rinse
- Pre Wash
- Rinse+
- Time Delay
- Intensive
- Rinse+
- Rinse+Spin
- Hold
Option
- Low Temp.
- Iron Dry
- Cupboard Dry
- Eco Dry
- Time
–
Rating
Less than 7 kg
Less than 4 kg
Less than 4.5 kg
1 king size
(9 Tog)
Less than 2 kg
To activate:
press and hold
the Option buttons
simultaneously until
" " appears in the
display.
To deactivate:
press and hold
the Option buttons
simultaneously for 3
seconds until the
" " is removed
from the display.
Change to the desired program, whilst in child lock mode:
Empty the drum
completly and close
the door
Add anti-limescale
(Calgon) to the main
wash compartment.
Close the disp. drawer
Power ON with
Then press and
hold Spin and
Temp. button
Press the
Start/Pause
button to start Tub
Clean process
After the cycle is
complete, leave the
door open to dry
Select this function to lock the buttons on the control panel and to prevent tampering.
Press and hold
the Option buttons
simultaneously
Press
Start/
Pause
Select the desired
program
Press
Start/Pause
3 sec.
3 sec.
The Beep on/off function can be set only during the washing cycle.
To set the Beep On/Off function follow the below steps.
1.Turn on the washing machine (by pressing the
Power
button).
2.Press the
Start/Pause
button.
3. Press and hold the
Option
and
Spin
button simultaneously for three seconds to set
Beep on/off function.
Once the Beep on/off function is set, the setting is memorized even after Power is off.
Child Lock
3 sec.
TUB CLEAN is special cycle to clean the inside of the washing machine.
A higher water level is used in this cyle at higher spin speed.
Perform this cycle regularly.
Tub Clean
Beep on / off
• This washer-dryer’s automatical process from washing to drying can be selected easily.
• For most even drying, make sure all articles in the clothes load are similar in material and thickness.
• Do not overload dryer by stuffi ng too many articles into drum. Items must be able to tumble freely
• If you open door and remove load before dryer has finished its cycle, remember to press the
Start/Pause button.
• By turning the DRY dial, you can select :
Cupboard Dry Eco Dry 30 60 120 Low Temp. Iron Dry
• After the end of dry, “ ” is displayed. By pressing the “Start/Pause” button the
program can be ended. If you not press the “Start/Pause” button, the program is ended after
about 4 hours. “ ” Cooling Cycle.
Dry
Cold water tap must be left on during drying cycles.
2.Drying time guide
• By turning the DRY dial, the drying time can be selected.
• Drying course can last up to 150min.
When selecting drying only, drying course will start after spining.
• These drying times are given as a guide to help you set your dryer for manual drying.
Drying times can vary greatly depending on dampness, room temperature and type of fabric
and your own experience will be your best guide.
Fiber or Leather Materials
- Always check the manufacture’s instructions.
Woolen Articles
- Do not tumble dry woolen articles. Pull them to their
original shape and dry them flat.
Baby clothes and Night Gowns
- Always check the manufacture’s instructions.
Woven and Loopknit Materials
- Some woven and loopknit materials may shrinks, by varying
amounts, depending on their quality.
- Always stretch them out immediately after drying.
Rubber and Plastics
- Do not dry any items mode from or containing rubber
or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Permanent Press and Synthetics
- Do not overload your dryer
- Take out permanent press articles as soon as the
dryer stops to reduce wrinkles.
Fiber glass
- Do not dry fiberglass articles in your dryer. Glass particles
left in the dryer could be picked up by your clothes the next
time you use the dryer and irri tate your skin.
3.Completion of Drying
• When drying cycle is completed, “ ” [Cool Down] is displayed on the Multi display.
• The Cool Down is setting automatically when a drying cycle is complete.
• When you are not remove a loaf of clothes from the dryer as soon as it stops, wrinkles can form.
• The Cool Down operating periodically tumbles, rearranges and fluffs the load to tumbles, rearranges and fluffs the
load to hours.
• The “ ” message will continue to display until the clothes are removed or the Start/Pause button is pressed.
1. Drying Automatic guide
• Use your Automatic Cycles to dry most loads. Electronic sensors measures the temperature of the exhaust
to increase
or decrease drying temperatures for faster reaction time and tighter temperature control.
• Recommend Automatic drying course as a kind of clothes.
a) Low Temp. : For Synthetics select
b) Iron Dry : If you want to iron clothes
c) Cupboard Dry : For Cottons select
Note:
The estimated drying time varies from the actual drying time with an Automatic.
The type of fabric, size of the load, and the dryness selected affect drying time.
Note:
The last 6 minutes of dryinng time, A sensor(Thermistor) detects clothes drying conditions.
When the dryness is low, cycle time will be added by max. 30 mins with “6” mins remaining window display.
d) Eco Dry : A special cycle to reduce water usage during
the dry cycle.
e) Time (30/60/120 minutes) - 30 min. : Cotton 1.5 kg
- 60 min. : Cotton 3 kg
- 120 min. : Towel 4 kg
W
ait
un
til w
ash
ing
is f
inished
Hand Wash
/ Wool
Select
Spinning speed
and
Washing temperature
Select an
Option
Pre Wash / Rinse+Spin / Rinse+ / Hold
Water Temperature:
Select water temperature to suit wash cycles. Always follow garment manufacture’s care label or instructions when washing.
Intensive:
If the laundry is heavily soiled “Intensive” option is effective.
Set program at “Wash : Cotton 60°C + Intensive” and “Dry : Eco Dry (First drying cycle load : 4kg, Second drying cycle load : 4kg)” for test in accordance
with EN50229 and IEC50229.
Pre Wash:
If the laundry is heavily soiled, “Pre Wash” Cotton is recommended.
Pre Wash is available in the Cotton, Cotton Quick, Synthetic, Baby Care and Wash+Dry (4kg/4kg) programs.
Rinse+ :
Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
Medic Rinse:
For best results or for cleaner rinsing, you can choose this heated Rinse option. Medic Rinse is automatically selected on Baby Care program.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the
products are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine M0806.
Notes
Neutral detergent is recommended. The wool cycle features gentle tumbling and low-speed spin for garment care.
Select the
Dry mode
Press Start / Pause
to start or pause the washing
process
