background image

25

Tub Clean is a special cycle to clean the inside of the washing machine. 
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.  

1

. Remove any clothing or items from the

washer and close the door.

2

. Open the dispenser drawer and add Anti

limescale(e.g. Calgon) to the main wash
compartment.

3

. Close the dispenser drawer slowly.

4

. Power On and then press and hold 

Intensive

and 

Crease Care

button for 3 seconds. then 

“         ” will be displayed on the LED display.

5

. Press the Start/Pause button to start. 

6

. After the cycle is complete, leave the door

open to allow the washer door opening,
flexible gasket and door glass to dry. 

• 

“Door Lock” 

- For safety reasons, the

door will lock while machine is in use and the
“Door Lock” icon will light up. You can safely
open the door after the “Door Lock” icon
turns off. This can take up to 3 minutes.

• 

While 

"Detecting"

is shown on the

display the washing machine rotates slowly
and detects how much laundry is loaded in
the drum.
It will take a short time.

A

B

Tub Clean

Door Lock & Detecting

How to use washer

NOTE

• Do not add any detergent to the detergent compartments. 
• Excessive suds may generate and leak from the washer.

CAUTION

• If there is a child, be careful not to leave the door open for too long.

Содержание F1096TD21





































Отзывы: