LG F1069FD Скачать руководство пользователя страница 47

Страница: 47 / 68

PROGRAMMING MODE - SETUP MODE

NOTE

•

Top spin speed

• If you select 800 or below, the final spin time will be reduced by 9minutes
• If you select 1150 rpm, the final spin time is fixed by 13 minutes

Entering set up mode.

You will see LqC1

Button

Display

Press the

WHITES

button.

Press the

COLORS

or the

DELICATES

button until appears in the display.

Press the

START

button.

Press the

COLORS

or the

DELICATES

button until appears in the display.

Press the

START

button.

Display previous top spin speed.

Press

)

DELICATES(-)

button to select top spin speed. (0~3)

Press the

START

button.

The machine sets up the top spin speed, then advances to the next process

automatically.

1. Continue to set up the next mode.

2. Stop the change of setup value and go back to ready mode.

• Coin type - Turn on/off toggle switch.

• Card type - Pull the service card.

• OPL type - Push the WHITES button twice.

18. Top spin speed – final spin time depends on RPM

0: 1150 rpm
1: 1000 rpm
2: 800 rpm

3: 700 rpm

Содержание F1069FD





































































Результаты поиска

Содержание F1069FD

Отзывы:

LG F1069FD, Руководство пользователя, Страница: 47 / 68

Результаты поиска

Содержание F1069FD

Отзывы: