manualshive.com logo in svg

LG F1*20TD(1~9) Series, Руководство по обслуживанию, Страница: 14 / 46

Поделиться
Скачать
LG F1*20TD(1~9) Series Скачать руководство пользователя страница 14

F1*22TD(1~9)

Time Delay & Beep ON/OFF

• Press the button when reservation washing

is needed.

• When the button is pressed, [        ] is

displayed, maximum delay of [        ] hours
can be set.

• Each press advances time delay by the hour. 
• Use [Power] button to cancel [Time Delay]
• [Time Delay] means the time required from

the present to the completion of washing.

• The Beep on/off function can be set by

pressing and holding the Time Delay button
(About 3 seconds).
The Beep on/off function can be set at any time
and it is automatically cancelled in the event of
a power cut.
The Beep on/off function also works when
power is off.

Power button

• Press the button to turn power on and off.

• Press the button to cancel the time delay.

LOAD TEST MODE    

Page 19

- Press and Hold ‘

Temp.

’ & ‘

Spin

’ buttons and then press ‘

Power

’ button.

Water level frequency

- Press and Hold ‘

Temp.

’ & ‘

Medic Rinse

’ buttons simultaneously.

13

Spin Button

• By pressing the Spin Button the spin speed

can be chosen

• F10**TD(1~9)

Rinse Hold/No spin/400/800/1000

• F12**TD(1~9)

Rinse Hold/No spin/400/800/1200

• F14**TD(1~9)

Rinse Hold/No spin/400/800/1200/1400

LED display

• Display the estimated remaining time 

(Hour : Minute) to finish.

• In case of abnormal operation, error indications are

displayed.

(                                                                            )

• See troubleshooting guide.

Water temperature selector

• Press the button to select water temperature.

• 95°C is selected for Cotton and Baby Care

only.

• By pressing the button while operating the

washer, the present temperature is displayed.

Содержание F1*20TD(1~9) Series















































Отзывы:

Нет отзывов