14
EN
Restarting the Air
Conditioner Automatically
When the air conditioner is turned on again after a
power failure, this function restores the previous
settings.
Disabling Auto Restart
1
Open the front panel.
•
Lift up both sides of the panel slightly.
2
Press the
ON/OFF
button and hold it for 6
seconds, then the unit will beep twice and the
lamp will blink twice 4 times.
•
To re-enable the function, press the
ON/OFF
button and hold it for 6 seconds. The unit will
beep twice and the lamp will blink 4 times.
NOTE
•
The feature may be changed according to the type
of model.
•
If you press and hold the
ON/OFF
button for 3 – 5
seconds, instead of 6 seconds, the unit will switch
to the test operation. In the test operation, the unit
blows out strong cooling air for 18 minutes and
then returns to factory default settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling & Heating Model
Cooling Mode
Auto Changeover Mode
Dehumidification Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press
MODE
button repeatedly to select the
Cooling Mode.
•
is displayed on the display screen.
3
Press
or
button to set the desired
temperature.
Содержание F09KM
Страница 32: ...Memo ...
