LG ESNW126J3A0, Руководство по установке

Страница: 24 / 30

Heating Only Mode
Heating Only Mode switching func-
tion setup
1
Supply the power to the unit with no func-
tions active.
2
Enter the I nstaller Code and set the code
to 4 7.
3
Press
|
to select the code No. 4 7 then,
check if buzzer beeps.
4
Cut the power to the unit.
5
Turn back on the power to the unit after 30
seconds.
Heating Only Mode switching func-
tion disable setup
1
Supply the power to the unit with no func-
tions active.
2
Enter the I nstaller Code and set the code
to 4 8.
3
Press
|
to select the code No. 4 8 then,
check if buzzer beeps.
4
Cut the power to the unit.
5
Turn back on the power to the unit after 30
seconds.
* How to enter the installer mode
Press Reset Button and ‘ A ’ Button
* How to set the code
Set the code you want by pressing TEMP
button (
e
) and press
|
.
e
10 digit
1 digit
CAUTION
- Once the function is set up, Cooling,
Dehumidification Auto Change over can-
not be used.
- Once the function is disable it will return
to its normal state.
- Code cannot be entered when it is in
operation mode. I t must be OFF state to
enter code.
- Even if able to enter code in ON state, it
won’t function if the code is not entered
in OFF state.
- At Heating Only Mode, if the product
gets turned off while the wireless
remote control is set at other than heat-
ing / blowing, the product will not get
turned back on. Turn off the product
after the wireless remote control is set
at heating / blowing and then turn back
on.
!
Press