Service Manual
23
Electronic parts Troubleshooting Guide
Is the heater LCD "ON"?
Is the output
voltage of IC03D on the
MAIN PCB DC5V?
1. Reconnecting power supply.
Press Heater Key.
Is the heater operation?
1. Select heater operation mode.
Is the output
voltage of IC01M's 16PIN on the
MAIN PCB 0V?
Is the magnetic contactor for
heater OK?
Check or exchange E/Heater.
1. Set following.
'Set temp. > Room temp.'
1. Check or exchange IC03D
on the MAIN PCB.
Is the voltage
between 1PIN of CN5 and
NEUTRAL 220V?
1. Check or exchange IC01M.
1. Check or exchange RY1.
Set temp. > Room temp.?
1. Check the wiring of Magnetic
contactor.
2. Exchange Magnetic contactor.
YES
YES
YES
NO
YES
YES
NO
YES
NO
NO
NO
NO
YES
NO
Possible trouble 10
: No heater operation performed.