Connecting
11
C
onnecting
2
y
Not all HDCP-compatible HDMI or DVI devices
will work with this unit.
-
The picture will not be displayed properly
with non-HDCP device.
-
This unit does not playback and TV screen is
changed to black screen.
Resolution Setting
The unit provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [SETUP] menu.
y
Depending on your TV, some of the resolution
settings may result in the picture disappearing or
an abnormal picture appearing. In this case, set
the [Resolution] option to suitable one on the
setup menu.
y
Changing the resolution when the unit is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
unit and then turn it on again.
Connecting to an
Amplifier
Connecting Audio cable
Connect the AUDIO OUT on the unit to 2CH AUDIO
IN on amplifier with Audio cable, such as AUDIO
Left/Right with white/red.
Connecting COAXIAL (digital
audio) cable
Connect the COAXIAL (digital audio out) on the
unit to Digital Audio IN (COAXIAL) on amplifier with
COAXIAL cable.
y
If your TV is not capable of handling 96 kHz
sampling frequency, set the [Sample Freq.]
option to [48 KHz] on the setup menu (See page
12).
y
If your TV is not equipped with Dolby Digital
and MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu
(See page 12).
Connecting HDMI cable
Connect the HDMI OUT on the unit to the HDMI IN
on amplifier with HDMI cable.
Connect the HDMI OUT jack on amplifier to HDMI
IN jack on TV with HDMI cable, if the amplifier has
HDMI OUT jack.
Audio Cable
Amplifier/
Receiver
Rear of the Unit
Coaxial Cable
Amplifier/
Receiver
Rear of the Unit
Rear of the Unit
TV
HDMI Cable
Amplifier/
Receiver
HDMI Cable
