System Setting
System Setting
12
S
ys
tem Se
tting
3
Setup
When the unit is turned-on at the first time, you
have to select the desired language. (optional)
Adjust the settings
You can change the settings of the player in the
[SETUP] menu.
1.
Press SETUP.
2.
Select the first setup option using
ws
and
press
d
to move to the second level.
3.
Select a second setup option using
ws
and
press
d
to move to the third level.
4.
Select a desired setting using
ws
and press
ENTER to confirm.
5.
Press SETUP to escape from setup menu.
[LANGUAGE] Menu
Menu Language/Disc Audio/Disc
Subtitle/Disc Menu
Select and set the language you prefer.
[DISPLAY] Menu
TV Aspect
Select and set TV aspect ratio according to your TV
type and preference.
[4:3]:
Standard TV type
[16:9]:
Wide TV type
Display Mode
Select and set Display Mode according to your
preference. Display Mode works only when the TV
Aspect mode is 4:3.
[Panscan]:
Display full screen with cut non-
main scene on TV
[Letterbox]:
Display wide screen with black
stripe at top and bottom on TV
[AUDIO] Menu
Set the player’s Audio options according to various
disc output type you use.
Dolby Digital / DTS / MPEG
Select the type of digital audio signal to use the
DIGITAL AUDIO OUT jack.
[Bitstream]:
Select to connect DIGITAL AUDIO
OUT jack to an amplifier with Dolby Digital, DTS
or MPEG decoder.
[PCM] (for Dolby Digital / MPEG):
Select
to connect DIGITAL AUDIO OUT jack to an
amplifier without Dolby Digital or MPEG
decoder.
[Off] (for DTS):
Select to connect DIGITAL
AUDIO OUT jack to an amplifier without DTS
decoder.
Sample Freq. (Frequency)
Selects the sampling frequency of the audio signal
between [48KHz] and [96KHz].
DRC (Dynamic Range Control)
To adjust the volume level by itself when Audio
level reaches to more than the specific level (Dolby
Digital only).
Vocal
(DVX640H/DVX642H only)
To mix the vocal with music using the multichannel
karaoke DVD.
