11
Channel Class –
This option allows you to set the favorite channel.
Use
v
v V
V
select the a channel and press
ENTER
to set the favorite class on
each channel (shows
Fav
icon on top of the screen).
Channel Edit –
This option allows you to edit the channels.
[Add]: This option allows you to add a new channel. Use
v
v V
V
to select the
channel and press
ENTER
to add the selected channel.
[Select]: This option allows you to delete or move the preset channels.
To move the location of the preset channel, use
v
v V
V b B
to highlight the
channel you want to move on the [Move] column and press
ENTER
.
Use
v
v V
V
to move the selected channel to the desired position and then press
ENTER
to complete move.
To delete a preset channel, use
v
v V
V b B
to highlight the channel you want to
delete on the [Delete] column and press
ENTER
. The
x
marked channel will
not be displayed on the channel list. Press
ENTER
again to clear the
x
mark.
Aspect Ratio –
Selects the aspects ratio of the connected TV.
[4:3 PS]: Select this when connecting to a standard 4:3 screen TV and prefer
the wide picture on the entire screen cuts off the portions that do not fit.
[4:3 LB]: Select this when connecting to a standard 4:3 screen TV and prefer
the wide picture with bands on the upper and lower portions of the screen.
[16:9]: Select this when connecting to a wide-screen TV.
Antenna Feed 5V –
If you are using an indoor antenna, use one with a signal
amplifier rated at DC 5 V, 100 mA and set this option to [ON].
[ON]: Power is supplied to the connected antenna.
[OFF]: The unit does not supply power to the connected antenna.
Adjust the time settings
Set the channel that broadcasts a clock signal and the clock will be set auto-
matically. If the clock that has automatically set is different with your local clock,
you can adjust time using [Time Offset] option (For example, when summer time
is started in local area.). Press
B
to select [Time Offset] option. Press
v V
to
select a value then press
ENTER
(Off, +/-30 min, +/-60 min, +/-90 min, +/-120
min). Select “Off” if the clock that has automatically set is identified with your
local clock.
Adjust the lock settings
To access the Change Pin, Channel Lock, Parental Guidance options, you must
enter the 4-digit password. If you have not yet entered a password you are
prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make
a mistake while entering number, press
CLEAR
to delete numbers.
If you forget your password, you can reset it. Display the
SETUP
menu. Input
‘210499’ and press
ENTER
. The password has now been cleared.
Change Pin –
Changes the password.
Enter the new password twice after entering the current password.
Channel Lock –
You can lock certain unsuitable channels to prevent children
from accessing them, use
v
v V
V
to select a channel you want to lock and then
press
ENTER
to lock the channel. If you want to watch a locked channel. You
should input the password.
DV589H-E.BFRALLK_6716_ENG 1/26/10 7:45 PM Page 11
