Owner’s Manual 11
NOTE
: If you are not sure of the type of signal(s) you are receiving, let EZ Scan complete all the channel signal-type searches.
The TV will let you know when the TV(analog antenna), DTV(digital antenna), CATV(analog cable) and CADTV(digital
cable) channel scans are complete. If you don’t get an appropriate channel list or the signal is poor, then changes ANTEN-
NA/CABLE input and try EZ Scan again.
• In a poor signal area to improve picture quality, purchase
and install a signal amplifier.
• If the antenna or cable needs to be split for two TV’s,
install a “2-Way Signal Splitter” in the connections.
• If the antenna or cable is not installed properly, contact
your dealer for assistance.
Signal
Amplifier
3. Analog and Digital TV signals provided on cable and antenna
Antenna
RF Coaxial Wire (75 ohm)
Analog Antenna
Bronze Wire
Turn clockwise to tighten.
Cable TV Wall
Jack
RF Coaxial Wire (75 ohm)
CABLE
ANTENNA
Connection Option 1
Set VCR output switch to 3 or 4 and then tune TV to the
same channel number.
NOTE:
If you connect to both VCR and Cable Box, match same
channel number of RF output.
Connection Option 2
1. Connect the audio/video output jacks on VCR to the corre-
sponding input jacks on the TV.
When connecting the TV to VCR, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
If you have available an S-VIDEO output, the picture quality
is improved; compared to connecting a regular VCR to the
Video input.
2. Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
3. Select the input source with the
TV/VIDEO
button on the
remote control. (If connected to
VIDEO INPUT 1
, select
Video 1
input source)
Do not connect to both Video and S-Video at the
same time. In the event that you connect both Video
and the S-Video cables, only the S-Video will work.)
VCR Setup
VCR Setup
PC/DTV
(XGA
/480p
/720p
/1080i)
S-VIDEO
P
R
P
B
Y
MONO
CABLE
RGB INPUT
COMPONENT
INPUT2 INPUT1
DTV/DVD INPUT
RGB/DVI INPUT
(L)
(R)
AUDIO
(L)
(R)
AUDIO
VIDEO
(L)
(R)
AUDIO
(L)
(R)
AUDIO
AUDIO
CENTER
MODE IN
HDMI/
DVI(VIDEO)
MONITOR
OUTPUT
VIDEO
INPUT2
VIDEO
INPUT1
DIGITAL AUDIO
OPTICAL INPUT1
(COMPONENT2)
DIGITAL AUDIO
OPTICAL INPUT2
(DVI)
IEEE1394
DIGITAL AUDIO
OPTICAL OUTPUT
ANTENNA
S-VIDEO
OUT
IN
(R) AUDIO (L)
VIDEO
3
4
OUTPUT
SWITCH
ANT OUT
ANT IN
Cable
CARD
UPGRADE
PORT
VARIABLE
AUDIO OUT
G-LINK
VCR
1
2
Installation
Содержание DU-52SZ51D
Страница 46: ...Owner s Manual 46 46 DLP Projection TV ...
Страница 48: ...Owner s Manual 48 48 DLP Projection TV ...
Страница 50: ...Owner s Manual 50 50 DLP Projection TV ...