LG DT25BTSG, Руководство пользователя

Страница: 41 / 116

41 OPERATION
ENGLISH
Cycle Settings and Options
Cycle Modifier Buttons
SENSOR DE SECADO(SENSOR DRY) cycles
have preset settings that are selected automatically.
SECADO MANUAL(Manual Dry) cycles have default
settings, but you may also customize the settings
using the cycle modifier buttons. Press the button for
that option to view and select other settings.
Nivel de Secado(Dry Level)
Selects the level of dryness for the cycle. Press the
Nivel de Secado(Dry Level) button repeatedly to
scroll through available settings.
• This option is only available with SENSOR DE
SECADO(SENSOR DRY) cycles.
•
The dryer will automatically adjust the cycle time.
Selecting Seco or Muy Seco(More or Very) will
increase the cycle time, while Menos Seco or
Húmedo(Less or Damp) will decrease the cycle
time.
• Use a Secado Menos Seco or Secado
Húmedo(Less Dry or Damp Dry) setting for items
that you wish to iron.
Temp.
Adjusts the temperature setting. This allows precise
care of your fabrics and garments. Press the Temp.
button repeatedly to scroll through available settings.
Tiempo de Secado(Time Dry)
Allows you to manually select the drying time, from 20
to 60 minutes, in 10-minute increments. Use this for
small loads or to remove wrinkles.
Señal(Signal)
Press the Señal(Signal) button repeatedly to change
the volume or turn on/off the button tones and the end
of cycle melody.
Más Tiempo/Menos Tiempo (More Time/Less
Time)
Use the Más Tiempo/Menos Tiempo (More Time/
Less Time) buttons to add or reduce the drying
time of a SECADO MANUAL (Manual Dry) cycle in
1-minute increments.
Cycle Option Buttons
The dryer features several additional cycle options to
customize cycles to meet individual needs. Certain
option buttons also feature a special function that
can be activated by pressing and holding that option
button for 3 seconds. (See Special Functions on the
following page for details.)
Adding Cycle Options to a Cycle:
1
Turn on the dryer and turn the Cycle Selector
Knob to select the desired cycle.
2
Use the cycle modifier buttons to adjust the
settings for that cycle.
3
Press the cycle option button(s) for the option
you would like to add. A confirmation message is
shown in the display.
4
Press the Inicio/Pausa(Start/Pause) button to
start the cycle. The dryer starts automatically.
Anti Arrugas(Wrinkle Care)
Selecting this option will tumble the load periodically
for up to 3 hours after the selected cycle, or until the
door is opened. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
Alerta Secado Húmedo(Damp Dry Signal)
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you
would like to iron or hang while still slightly damp.
Ahorro de Energía(Energy Saver) (on some
models)
This option helps to reduce energy consumption in
the Normal cycle, depending on the load size.
When the Ahorro de Energía(Energy Saver) option is
selected, the cycle begins with an air dry section and
the drying time is increased.
NOTE
The Ahorro de Energía(Energy Saver) option is
turned on by default in the Normal cycle. Turn off the
Ahorro de Energía(Energy Saver) option for a faster
Normal cycle which begins with heated drying.
To turn the
Ahorro de Energía(Energy Saver)
default off, press and hold the Ahorro de
Energía(Energy Saver) button. Encendido(On) or
Apagado(off)
appears in the display.