Front Panel
Rear Panel
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Standby/ON
· · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
Selects Function
· · · · · · · · · · · · · · · · · · · · · · · · · ·
Adjusts Volume
PORT.IN
· · · · · · · · · · · · · ·
Connect to a Portable device
OPTICAL IN
· · · · · · · · · · ·
Connect to an Optical device
Subwoofer Connection
1
Place the wireless subwoofer near the sound bar and
follow steps below.
a
Connect the power cord of wireless
subwoofer to the outlet.
b
Turn on the sound bar :
The sound bar and wireless subwoofer will
be
automatically
connected. The subwoofer's
yellow - green LED turns on.
Subwoofer Connection Manually
a
Reset the subwoofer
If the yellow - green LED on the subwoofer
blinks quickly, skip this step and go to
b
y
Press and hold
PAIRING
button for 5 seconds.
y
The LED lights up alternately in red and yellow
- green.
y
Plug out the power cord. After the LED turns
off completely, plug in the power cord again.
When the reset is completed, the subwoofer's
yellow - green LED blinks quickly.
b
Reset the sound bar
y
Adjust volume to minimum until the red LED
on the sound bar lights up for a while.
y
Press and hold (Mute) button on the remote
control for 3 seconds.
y
The red LED on the sound bar blinks quickly.
y
Turn the sound bar’s power off and on while
the subwoofer’s yellow - green LED blinks.
When the connection is completed, you can see the
yellow - green LED on the subwoofer.
Keep the sound bar and the subwoofer away
from the device (ex. wireless router, microwave
oven, etc.) over 1m to prevent wireless
interference.
!P
SH3B.DDEULLK_SIM_ENG_4926.indd 2
2016-06-24 �� 2:32:56
