E-9
MOUNTING THE DVD-ROM DRIVE
Step 1.
Turn off and unplug your
computer and all peripheral
devices attached to it.
Step 2.
Remove the cover from your
computer.
Step 3.
Remove the front panel from an
unused half-height slot.
Step 4.
Slide the DVD-ROM drive into
the half-height slot, and secure
the drive in place with screws.
Note:
If there is too much space between
the sides of the drive and the drive
bay, you may need to install spacer
brackets, available at your local
computer store.
Step 5.
Push the power supply cable
connector firmly into the power in
connector.
Figure 6. Removing the Blanking plate
Figure 7. Mounting the Drive
Power supply connector
(4-pin connection cable)
Figure 8. Connecting the Power
Supply Cable
GND
Pin assignment
The pin assignment of the power-in
connector is as follows:
12V DC
5V DC
