9
Hooking up the unit
Audio and Video Connection for AV IN or AV OUT
Connect the AV IN/OUT jack on the unit to the corresponding input or output
jacks on your TV or an external device using the supplied AV cable as shown
below.
Selecting the operation mode
You need to select an operation mode before using this unit. Press
MODE
on
the unit and the operation mode selection menu appears. Use
b
/
B
to select a
mode then press
ENTER
.
• [DISC]: To playback the inserted disc.
• [EXTERNAL]: To playback the file(s) in the connected USB Flash Drive or
external memory card. After selecting [EXTERNAL], select [USB] for USB
Flash Drive or [Memory Card] for the external memory card.
• [INTERNAL]: To playback the file(s) in the internal memory.
• [AV IN]: To watch a video/audio signal from the external device using this
unit.
Mixed media – MP3/WMA and JPEG
When playing media containing with MP3/WMA and JPEG files together, you
can select which menu of files you would like to play by pressing
TITLE
.
Rechargeable battery
• Its internal rechargeable battery provides you with the freedom to pass it
around and play the files without the power cord.
• The internal rechargeable battery will start charging only when the unit is
turned off and the AC adapter is connected to a power outlet.
• The charging stops if you turn on the unit.
• The charging will take approximately 3 hour 30 minutes.
• Operating time on battery: approximately 3 hour 30 minutes
The operating time on battery may vary depending on the battery status,
operational status and environment conditions.
• The battery indicator will turn red while charging. Once the charging is com-
plete, the indicator light changes to green.
• When the remaining time of the battery power is under a few minutes,
“Check Battery” will appear on the screen.
Plug into the
“AV IN/OUT” jack.
TV or the external device
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
DP392-N_AUSALLK_ENG 6/2/08 12:00 PM Page 9
