Operating
25
Oper
ating
4
Radio Operations
Listening to the radio
1. Select tuner (FM) function by using
FUNCTION
on the remote control or
FUNC.
on the unit
The last received station is tuned in.
2. Auto tuning :
Press and hold
TUNING (-/+)
on the remote
control or
TUNING (-/+)
on the unit for about
two seconds until the frequency indication
starts to change, then release. Scanning stops
when the unit tunes in a station.
Manual tuning :
Press
TUNING (-/+)
on the remote control or
TUNING (-/+)
on the unit repeatedly.
3. Adjust the volume by pressing
VOL (+/-)
repeatedly or rotate Volume knob on the unit.
Improving poor FM reception
Press
d
MONO/STEREO
on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Select tuner (FM) function by using
FUNCTION
on the remote control or
FUNC.
on the unit
The last received station is tuned in.
2. Select the desired frequency by pressing
TUNING (-/+)
on the remote control or
TUNING
(-/+)
on the unit.
3. Press
PROG./MEMO.
. A preset number will flash
in the display window.
4. Press
PRESET (
w/s
)
to select the preset
number you want.
5. Press
PROG./MEMO.
. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET (
w/s
)
or
PRESET (+/-)
on the unit.
Deleting the saved stations
Each of the saved stations
1. Select the saved station you want to delete.
2. Press
CLEAR
. A preset number will blink on the
display window.
3. Press
CLEAR
again while the preset number is
displayed.
All the saved stations
1. Press and hold
CLEAR
on the remote control
for about two seconds. “CLEAR” will blink on the
display window.
2. Press
CLEAR
again while “CLEAR” is displayed.
All the saved stations are cleared.
DM1530-DU.AESPLLK_ENG_2304.indd 25
2015-04-02 10:37:18