LG DLEY1701, Руководство по обслуживанию

Страница: 41 / 62

41
1. Open the door so that the hinge screws are accessible.
2.While supporting the door, remove the four hinge screws, two
from each hinge. Set the door aside face down on a protected
surface to prevent damage to the door or the work surface .
screwdriver, being careful not to scratch the paint. Install the latch
hole cover on the opposite side, where the latch mechanism was
removed. Install the latch mechanism in the position from which you
removed the latch hole cover, using the two screws removed in step 3.
screwdriver, being careful not to scratch the paint. Rotate the hinge
cover 180 degrees and install it on the opposite side, where the upper
hinge was attached.
THE DRYER DOOR IS VERY LARGE AND HEAVY. Failure to follow the
instructions below can result in damage to the dryer, property damage
or personal injury.The edges of the door cover may be sharp.Take care
when handling, or wear gloves to avoid injury.
Be sure to support the weight of the door before removing the
hinge screws.
Use a Phillips screwdriver to remove the two screws and the latch
mechanism on the front panel of the cabinet.
5.
hinge
cover
upper
hinge
hinge
bracket
latch
hole
cocer
hinge
latch
mechanism
12
DOOR REVERSE