LG DLE3095 series Скачать руководство пользователя

Страница: 44 / 58

SMART FUNCTIONS

SmartThinQ Smart Diagnosis™

•

For appliances with the

logo

Use the Smart Diagnosis feature in the SmartThinQ

application for help diagnosing issues with the

appliance without the assistance of the LG Customer

Information Center.
Follow the instructions in the SmartThinQ application

to perform a Smart Diagnosis using your smartphone.

NOTE

• Smart Diagnosis™ cannot be activated unless

the appliance can be turned on using the

Power

button. If the appliance cannot be turned on,

troubleshooting must be done without using Smart

Diagnosis™.

Smart Diagnosis™ Function

Should you experience any problems with the

appliance, it has the capability of transmitting data

via your telephone to the LG Customer Information

Center. NFC or Wi-Fi equipped models can also

transmit data to a smartphone using the LG

SmartThinQ application.

Smart Diagnosis™ through the

Customer Information Center

•

For appliances with the

logo

This method allows you to speak directly to our

trained specialists. The specialist records the data

transmitted from the appliance and uses it to analyze

the issue, providing a fast and effective diagnosis.

Call the LG Electronics Customer Information

Center at:
(LG U.S.A.) 1-800-243-0000
(LG Canada) 1-888-542-2623

When instructed to do so by the call center,

place the mouthpiece of the phone close to the

Smart Diagnosis™ icon. Do not press any other

buttons.

Press and hold the

Temp.

button for 3 seconds.

Keep the phone in place until the tone

transmission has finished.

Once the countdown is over and the tones have

stopped, resume your conversation with the call

center agent, who will then be able to assist you

using the information transmitted for analysis.

NOTE

• Smart Diagnosis™ cannot be activated unless

the appliance can be turned on using the

Power

button. If the appliance cannot be turned on,

troubleshooting must be done without using Smart

Diagnosis™.

• For best results, do not move the phone while the

tones are being transmitted.

• If the call center agent is not able to get an accurate

recording of the data, you may be asked to try

again.

• The Smart Diagnosis™ function depends on the

local call quality.

• Bad call quality may result in poor data transmission

from your phone to the call center, which could

cause Smart Diagnosis™ to malfunction.

Содержание DLE3095 series



























































Результаты поиска

Содержание DLE3095 series

Отзывы:

Похожие инструкции для DLE3095 series

Бренды по названию

Популярные бренды

LG DLE3095 series, Руководство пользователя

Результаты поиска

Содержание DLE3095 series

Отзывы:

Похожие инструкции для DLE3095 series

Бренды по названию

Популярные бренды