Operating
22
Oper
ating
4
Screen Saver
The screen saver appears when you leave the unit
in stop mode for about five minutes.
System Select - Optional
You must select the appropriate system mode for
your TV system. If “NO DISC” or “NO USB” appears
in the display window, press and hold
M
for more
than five seconds to select a system. (AUTO/NTSC/
PAL)
Displaying file information
(ID3 TAG )
While playing an MP3 file containing file
information, you can display the information by
pressing
DISPLAY
.
Radio Operations
Be sure to fully extend the FM wire antenna.
Listening to the Radio
1. Press
FUNCTION
until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold
TUNING (-/+)
for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
or
Press
TUNING (-/+)
repeatedly.
3. Adjust the volume by rotating
VOLUME(-/+)
on
the front panel or by pressding
VOL +
or
-
on
the remote control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press
FUNCTION
until FM appears in the display
window.
2. Select the desired frequency by using
TUNNING (-/+).
3. Press
PROG./MEMO
. a preset number will flash
in the display window.
4. Press
PRESET (
w/s
)
to select the preset
number you want.
5. Press
PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
Deleting all the saved stations
1. Press and hold
CLEAR
for two seconds.
“CLEAR” will flash up on the unit display.
2. Press
CLEAR
to erase all of the saved radio
stations.
Improving poor FM reception
Press
d
on the remote control. This will change the
tuner from stereo to mono and usually improve the
reception.
DH3140S-F0_AZAFLLK_ENG_5470.indd 22
2014-06-10 1:48:50