High
Speed
FORCED
FORCED
OPERATION
FORCED
OPERATION
AUTO
RESTART
AUTO
RESTART
22
Deluxe High Wall Mini Split
Operation procedures when the remote control can't be used.
The operation will be started if the power button is pressed.
If you want to stop operation, re-press the button.
Forced Operation
Auto restart
In case the power comes on again after a power failure, Auto Restarting
Operation is the function to operate procedures automatically to the previous
operating conditions.
If you want to use this operation, press the Auto Restart Button.
Helpful information
For maximum product life and efficiency this unit has been designed, in the
heating mode, to lock-out at outdoor temperatures below 26-29degF.
At outdoor temperatures below 26-29degF. another means of heating the
conditioned space must be provided.
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the value when the fan
speed is set to high, and the capacity will be lower at low or medium fan
speed.
High fan speed is recommended when you wish to cool the room quickly.
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, open the front panel upward and Press the power button let it be
pressed for about 3 seconds.
If you want to stop the operation, re-press the button.
Operating Instruction
Heat pump Model
Cooling Model
Room Temp.
≥
24°C(75.2°F)
21°C(69.8°F)
≤
Room Temp. < 24°C(75.2°F)
Room Temp. < 21°C(69.8°F)
Operating mode
Cooling
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
Healthy Dehumidification Rule
High
Setting Temperature
22°C(71.6°F)
22°C(71.6°F)
23°C(73.4°F)
24°C(75.2°F)
