①
Programme
•
Press the cycle that corresponds to your desired wash cycle.
②
Rinse
•
Repeated pressing of the
Rinse
button will select Extra Hot, Rinse+, Extra Hot & Rinse+.
•
If you select the
Extra Hot(
)
function, the operating temperature will be up to 80
℃
.
(Eco, Auto, Steam Care, Steam Dual Spray, Steam Power)
• When you select
Rinse+(
)
an additional rinse cycle is added.
③
Child Lock
(
)
•
Used to lock or unlock the control buttons to prevent all the settings from being changed by a child.
•
To activate or release the
Child Lock
function, press the
Child Lock
button for 3 seconds while the dishwasher is
in operation.
• All controls will be disabled except the
Child Lock
and
Power
buttons.
• Turning off the dishwasher will not reset the
Child Lock
function. You must release the
Child Lock
before you can
operate the dishwasher.
④
Spray
•
With each press, the level of water jet is changed to
Soft (
), Medium(
)
and
Strong(
)
in a sequence.
(Only Steam Care and Steam Dual Spray)
⑤
Half load
• In case of small load, use upper or lower rack only to save energy.
• With each press, select
Upper( )
or
Lower( )
rack only. (Except Quick & Dry, Steam Power)
• In case you don’t select this button, the machine always works vario washing, which operates upper and lower spray
arm alternately.
⑥
Delay Start
•
If you want to delay the start of selected programme, press this button.
•
Pressing this button will increase time by 1 hour.
•
The delay start time can be adjusted from 1 hour to 19 hours.
⑦
Power
•
For operating, press this button first for power on.
•
After operating, this button automatically switches off for safety and energy saving.
•
In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.
⑧
Beep On/Off
• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the
Spray
and
Delay Start
button simultaneously for a few seconds.
⑨
Steam
( )
•
The
Steam
symbol light will stay on when the
Steam
course has been selected.
⑩
Indicator
⑪
Time Left
•
Before starting, the display window shows the running time of the selected programme.
•
After starting, the display window shows the remaining time.
•
If the dishwasher has a trouble, the trouble type is displayed. (OE, FE, IE, AE, HE, LE, tE)
•
If these error letters are displayed, please refer to the trouble shooting guide page 30 and follow the guide.
14
FUNCTION OF CONTROL BUTTON
•
Child Lock.
•
Refill with special salt.
•
Refill with rinse aid.
