background image

12

UNCTION OF CONTROL BUTTON

F

Process Indicator

• Indicates current program phase.
• The 

Wash

Rinse

and 

Dry

lamps twinkle while each phase of washing process. 

• The 

Clean

lamp turns on after all procedure is ended for 4minutes.

Salt & Rinse Refill Indicator

Salt

: Refill with special salt when the lamp turns on. 

Rinse

: Refill with rinse aid when the lamp turns on.

Half Load

• In case of small load, use upper or lower rack only to save energy.
• With each press, can select 

Upper

or 

Lower

rack only.

• In case you don’t select this button, the machine always works vario washing, which operate upper and

lower spray arm alternately.

Child Lock & Extra Hot Indicator

• Lamp will turn on when the Child Lock setting is on.

• Lamp will turn on when the Extra Hot setting is on.

D1418,D1419 only

Time Left

• Before starting, the display window shows the running time of the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble,  the trouble type is displayed.

“OE”, “FE”, “IE”, “EI”, “HE”, “CE”, “LE”, “tE”

• If this error letters are displayed, please refer to the trouble shooting guide page 26 and follow the guide. 

Delay Start

• If you want to delay the start of selected program, press this button.
• Pressing this button will increase time by 1 hour.
• The delay start time can be adjusted from 1 hour to 19 hours.

Program

• Press the cycle that corresponds to your desired wash cycle.

Extra Hot    

( D1418,D1419 only)

• If you select the Extra Hot function, the operating temperature will be up to 80ºC. 

(Dual Intensity, Auto, Eco)

Beep On/Off

• The dishwasher must be switched on.
• The beep on/off function can be set by pressing the 

Eco

and 

Gentle

button simultaneously for a few seconds. 

Child Lock

• Used to lock or unlock the control buttons to prevent all the setting from being changed by a child.
• To activate or release the 

Child Lock

function, press the 

Gentle 

and

Quick

buttons simultaneously for a few

seconds while the dishwasher is in operation.

• All controls will be disabled except the 

Child Lock

and 

Power

buttons.

• Turning off the dishwasher will not reset the 

Child Lock

function. You must release the 

Child Lock

before

you can operate the dishwasher.

Power

• For operating, press this button first for power on.
• After operating, this button automatically switches off for safety and energy saving.
• In case of irregular surge disturbance to the machine, the power may be automatically turned off for safety.

Содержание D1417WBB

































Отзывы: