LGE Internal Use Only
Copyright © 2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
3.2.2 GSM Transmitter
The RTR6275 transmitter outputs(DA_HB2_OUT and DA_LB1_OUT)include on-chip output matching
inductors. 50ohm output impedance is achieved by adding a series capacitor at the output pins. The
capacitor value may be optimized for specific applications and PCB characteristics based on pass-band
symmetry about the band center frequency, the suggested starting value is shown in Figure1.2.2
The RTR6275 IC is able to support GSM850/900 and GSM 1800/1900 mode transmitting. This design
guideline shows a quad-band GSM application.
Both high-band and low band outputs are followed by resistive pads to ensure that the load Presented
to the outputs remains close to 50ohm. The low-band GSM. Tx path also includes a Tx-band SAW filter
to remove noise-spurious components and noise that would be amplified by the PA and appear in the
GSM Rx band
3. TECHNICAL BRIEF
- 22 -
120Ω
120Ω
6pF
120Ω
120Ω
51Ω
5pF
56Ω
[Fig 3.2.2] GSM Transmitter matching
Z3X-BOX.COM
Содержание CU720 Black
Страница 203: ...Note Z 3 X B O X C O M ...
Страница 204: ...Note Z 3 X B O X C O M ...