E-9
Device Drivers
When using Windows 95/98/2000 or Window NT Workstation Ver. 4.0, the
installation of any software driver or special device is not required.
This CD-ROM drive is supplied with MS-DOS drivers on a 3
1
/
2
-inch floppy disk.
These drivers are required to use the CD-ROM drive in DOS and Windows 3.1.
Drivers for other Operating Systems are not normally required or available as
they usually have an generic IDE, E-IDE/ATAPI CD-ROM driver built in; Windows
95, 98, NT 3.51 and higher and OS/2 Warp 3.0 are such examples.
If it is necessary to edit any file manually, first make a backup copy on a floppy
disk, then edit the original file, save it to your hard drive, exit, and re-boot the
PC to ensure the change will be implemented.
Running the Install Program (MS-DOS Installation)
1. Insert the diskette into the appropriate drive with DOS booting.
2. Go to the floppy drive by typing A: or B: at the DOS prompt, as appropriate.
3. Type the word INSTALL and press [ENTER].
4. The INSTALL program will begin loading. When loading is complete, the
INSTALL program identification will appear on screen.
5. Follow the instructions on screen.
6. When installation is complete, remove the diskette and reboot your PC.
For Windows 95/98/2000 Users
[
In order to ensure normal drive operation, please check the following:
• The drive is displayed in
Windows 95/98 : [Control Panels]-[System]-[Device Manager]-[CD-ROM]
Windows 2000 : [Control Panels]-[System]-[Hardware]-[Device Manager]-[DVD/CD-ROM-Drive]
• 32-bit is displayed in
[control panels]-[system]-[performance]
[
If the drive is not recognized by your computer, please check the following
items.
•
If a
indicator is displayed on the IDE controller in [control panels]-
[system]-[device manager]-[harddisk controller], you will need to contact
your PC’s manufacturer or the motherboard’s manufacturer and get the appropriate
IDE controller driver.
[
Run ADD NEW HARDWARE in Control Panel to let PC search again for new
device.
Содержание CRD-8484B
Страница 13: ... ...