E-5
BACK VIEW
1
Digital Audio Output Connector
This is a digital audio output connector or Video CD output connector.
You can connect this to the digital audio system or Video CD Board.
2
Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
The supplied audio cable is a SoundBlaster
®
type cable. If you have a different
sound card, you will need to contact the sound card manufacturer to obtain the
proper cable for that card.
3
Master / Slave / CSEL Jumper
These three jumpers are used to set the CD-ROM Drive to either a Master,
Slave, or CSEL drive.
Refer to section HARDWARE INSTALLATION.
4
Interface Connector
This 40-pin connector is used to transfer and control signals between the
CD-ROM Drive and your PC.
Connect the 40-pin IDE cable in your PC to this connector.
5
Power-in Connector
Attach a power cable from the computer to this connector.
Figure 2. Back View
DIGITAL
ANALOG
INTERFACE
POWER
D
R
C S M
S L A
G L
G
39
1
+5
+12
GND
40
2
AUDIO
AUDIO
1
2
5
4
3
CRD-8360 eng 9/20/88 2:23 PM Page 5
