BACK VIEW
®Á
Digital Audio Ouput Connector
This is a digital audio output connector or Video CD output connector.
You can connect this to the digital audio system or Video CD Board.
®Ë
Analog Audio Output Connector
The Audio Output Connector connects to a sound card.
The supplied audio cable is a SoundBlaster
®
type cable. If you have a different
sound card, you will need to contact the sound card manufacturer to obtain the
proper cable for that card.
®È
Master / Slave / CSEL Jumper
These three jumpers are used to set the CD-ROM Drive to either a Master, Slave,
or CSEL drive.
Refer to section HARDWARE INSTALLATION.
®Í
Interface Connector
This 40-pin connector is used to transfer and control signals between the
CD-ROM Drive and your PC.
Connect the 40-pin IDE cable in your PC to this connector.
®Î
Power-in Connector
Attach a power cable from the computer to this connector.
E-5
8241B-Eng* 98.3.12 9:51 AM
∆
‰¿Ã¡ˆ5
