16
3
Clean the exhaust filter with a brush or running
water.
•
To maintain cleaning performance, remove
the dust from the exhaust filter at least once a
month.
•
Allow the exhaust filter to dry out of direct
sunlight in a well-ventilated place. Reinstalling
the filter before it is completely dry may result
in mildew or odor.
4
Clean the pre-filter with a brush or running
water.
•
Allow the pre-filter to dry out of direct sunlight
in a well-ventilated place. Reinstalling the
filter before it is completely dry may result in
mildew or odor.
•
The more often the filters are cleaned, the
more optimal the suction power will be.
•
Filters are consumables. Please purchase
more filters from an authorized service center.
5
Reassemble the pre-filter first. Then align the
exhaust filter with the hollow circle at top and
turn the filter clockwise until the solid white
circles align.
WARNING
•
Never wash the product body or separator with
water. Water may reach the motor and cause
electric shock or fire.
•
Keep foreign objects away from the motor to avoid
product damage, explosion or fire.
•
Do not insert fingers or sharp objects into the motor
enclosure to avoid product damage, personal
injury, or electric shock.
CAUTION
•
Make sure to reattach the exhaust filter and pre-
filter to the product after washing them. Using
the product without these filters will allow dust
to reach the motor inside the product and cause
malfunction.
Note :
•
Dust buildup reduces the suction power, so for best
results, make sure the filters are clean each time
you use the product.
※
Removing foreign objects from inside
the product
In order to maintain product performance, be sure
to remove any foreign objects and dust from inside
the product (body, extension pipe, inlets). Foreign
materials inside the product can cause the product to
shut down during operation, generate noise, or cause
poor suction.
Product body
Foreign objects
Product body
Pre-filter
Pre-filter
Foreign
objects
Foreign
objects
Extension pipe
Inlet port
Foreign
objects
Foreign
objects
※
If the inside of the product body, extension pipe, or
inlet port is clogged with foreign objects, the power
automatically turns off to protect the product.
Separate the battery from the product and remove
the foreign objects.
MFL69883611_en_180523.indd 16
2018-05-23 오후 12:26:36