Operating
17
Oper
ating
2
Radio Operations
Antenna Connection
Connect the FM Wire antenna to
FM ANTENNA
connector.
Be sure to fully extend the FM wire
antenna. After connecting the FM wire
antenna, keep it as horizontal as possible.
,
Note
Listening to the radio
1. Press
FUNCTION
until FM appears in the display
window.
The last received station is tuned in.
2. Auto tuning : Press and hold
TUNING (-/+)
for
about 2 seconds until the frequency indication
starts changing, then release. Scanning stops
when the unit tunes in a station.
Manual tuning : Press
TUNING (-/+)
repeatedly.
3. Adjust the volume by pressing
VOL (+/-)
.
Presetting the Radio Stations
You can preset 50 stations for FM . Before tuning,
make sure to turn down the volume.
1. Press
FUNCTION
until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING (-/+)
.
3. Press
PROGRAM/MEMORY
. A preset number
will blink in the display window.
4. Press
PRESET
.
FOLDER
W
/
S
to select the
preset number you want.
5. Press
PROGRAM/MEMORY
. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET
.
FOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold
PROGRAM/MEMORY
for two
seconds. “ERASEALL” will blink on the display
window.
2. Press
PROGRAM/MEMORY
to erase all saved
radio stations.
Improving poor FM reception
Press
d
/
M
on the remote control. This will change
the tuner from stereo to mono. Then the reception
will be better than before.
CM2820-DM.DDEULLK-6258-ENG.indd 17
2012-04-19 4:00:53
