LG CM2730, Руководство пользователя

Страница: 15 / 24

Operating 15
Oper
ating
3
y
The sound may be interrupted when
the connection interfered by the other
electronic wave.
y
You cannot control the Bluetooth device
with this unit.
y
Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
y
Although the distance between your
Bluetooth and the set is less than 10m, there
are obstacles between both, your Bluetooth
device cannot be connected.
y
Depending on the type of the device,
you may not be able to use the Bluetooth
function.
y
When not connected the Bluetooth,
“BLUETOOTH” and “BT READY” appears on
the control panel.
y
The electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
y
When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
y
If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
y
The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
y
If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
,
Note
Radio Operations
Be sure that both FM and AM aerials are connected.
(Refer to the page 12)
Listening to the radio
1. Press
F (FUNCTION)
until FM or AM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING -/+ for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING -/+ repeatedly.
3. Adjust the volume by pressing
VOLUME
on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press
F (FUNCTION)
until FM or AM appears in
the display window.
2. Select the desired frequency by pressing
TUNING -/+
.
3. Press
PROGRAM/MEMO.
a preset number will
flash in the display window.
4. Press
FOLDER · PRESET
w / s to select the
preset number you want.
5. Press
PROGRAM/MEMO.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
FOLDER · PRESET w / s .
CM2730-AM_DCOLLLK_ENG.indd 15 2013-04-18 �� 1:42:51