LG CL09R Скачать руководство пользователя страница 41

Страница: 41 / 45

MAINTENANCE AND SERVICE

ENGLISH

Indoor Unit

Grille, Case and Remote Control

- Turn the system off before cleanining, To clean,

wipe with a soft, dry cloth. Do not use bleach or
abrasives.

The air filters behind the front grille should be
checked and cleaned once every 2 weeks or
more often if neccessary.

- Never use any of the followings:

Water hotter than 40°C.
Could cause deformation and/or discoloration.

Volatile substances.
Could damage the surfaces of the air condi-
tioner.

Remove the Air filters.

- Take hold of the tab and pull slightly forward

to remove the filter.

Clean dirt from the air filter using a vacuum
cleaner or washing with water.

- If dirt is conspicuous, wash with a neutral

detergent in lukewarm water.

- If hot water (50°C or more) is used, it may

be deformed.

After washing with water, dry well in the

shade.

- Do not expose the air filter to direct sunlight

or heat from a fire when drying it.

Install the air filter.

CAUTION

Before performing any maintenance, turn off
the main power to the system.

NOTE

Supply power must be disconnected before
cleaning the indoor unit.

Air Filters

Air outlet vent

Air filters

B enzene

SCOURING

CLBARGERG

SIN

NER

CAUTION

When the air filter is to be removed, do not
touch the metal parts of the indoor unit.

It may cause an injury.

MAINTENANCE AND SERVICE

Содержание CL09R














































Результаты поиска

Содержание CL09R

Отзывы:

Похожие инструкции для CL09R

Бренды по названию

Популярные бренды

LG CL09R, Руководство пользователя

Результаты поиска

Содержание CL09R

Отзывы:

Похожие инструкции для CL09R

Бренды по названию

Популярные бренды