manualshive.com logo in svg

LG CJ44, Руководство по обслуживанию

Поделиться
Скачать
LG CJ44 Скачать руководство пользователя страница 39

 3-12

ONE POINT REPAIR GUIDE

NO SOUND 

There is no sound output by DIGITAL AUDIO AMP DAMAGE, repair the set according to the following 
guide.

5-2. BY DIGITAL AUDIO AMP DAMAGE (IN ALL FUNCTIONS)

5-2-1. Solution

Please check and replace IC701, IC702 on MAIN board.

5-2-2. How to troubleshoot (Countermeasure)

1) Check PWM_FL±, PWM_FR± & PWM_SW± signals from IC700 to IC701 & 702 each input function.



 If no signal, check if I2S audio signals are entered to IC700.

    Refer to “I2S audio signal interface” on Item 5-1.
2) Check PVDD.



 If PVDD is abnormal, check the SMPS.

3) Check +12 V for driving the gate of AMP IC.
    a. All the powers are normal, but if +12 V is low, there is possible for AMP IC to be damaged.
    b. Remove L741, L745, L731 and L740 one by one.
        When removed a inductance, if +12 V is recovered, the IC connected to it was damaged.
    c. Replace the IC with a new one.
4) Check the impedance between IC701/IC702_OUT_A/OUT_B/OUT_C/OUT_D & GND.
    a. If the impedance is 0 

Ω

, the IC must be damaged.

    b. After removing the heat sink, replace it with a new one.

5-2-3. Service hint (Any picture / Remark)

< Signal check point >

Содержание CJ44


































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды