21
206-4263
Complete
The TV will reboot in 2 second(s).
Installed Components
Maintenance File :
xxLY750H-UA00001.TLX
Boot Logo File :
Splash-Image-1920-x-1080.jpg
Software File (CPU) :
xxLY750H_v3.11.00_usb.epk
USB LG Smart Install Utility
Integrated USB Downloading
Select the configuration file(s) to download, and then select ‘Next’.
xxLY750H-UA00001.TLX
USB LG Smart Install Utility
Next
Previous
Splash-Image-1920-x-1080.jpg
xxLY750H_v3.11.00_usb.epk
Downloading Data...
Warning - Do not remove the USB device during this process
Maintenance File
File Name :
xxLY750H-UA00001.TLX
USB LG Smart Install Utility
Complete
Software File
File Name :
xxLY750H_v3.11.00_usb.epk
Ready
Boot Logo File
File Name :
Splash-Image-1920-x-1080.jpg
Ready
LG Smart Install Utility (Cont.)
(Continued from previous page)
4. The Integrated USB Downloading screen contains a listing of
the files stored in the LGSMARTINSTALL folder on the USB
device.
To select or de-select a file, respectively, use the Up/Down
arrows on the Installer Remote to highlight the filename, and
press
OK
to add or remove the checkmark at the left of the
filename.
Note:
The utility will only allow you to select one of each file
type for downloading. For example, if there are two TLX files
in the LGSMARTINSTALL folder, you can only select one or
the other of those two files. By default, the first instance of
each file type listed on the screen is selected.
Note:
Use the arrow keys on the Installer Remote to select
Previous
and press
OK
, as necessary, to exit the LG Smart
Install utility. If you accessed the utility via the EZ-Manager
Wizard, you will be returned to the last screen on display
before you inserted the USB device. If you accessed the
utility via the TV menus, you will be returned to TV viewing.
5. When you are ready to continue, use the arrow keys on the
Installer Remote to select
Next
, and then press
OK
.
The TV will show download progress in a new window. Do
NOT remove the USB device until downloading is complete.
When the download is complete, the TV will briefly display an
overview of the results in a “Complete” window and then
return to TV viewing or reboot (the latter if software has just
been downloaded).
6. Remove the USB memory device, and verify that the
appropriate configuration is resident on the TV.
Note:
(TLX configuration only) When configuration is complete,
the TV tunes according to the Start Channel setting in the
Installer Menu. If a Start Channel is specified, the TV will tune
to that channel, though in the case of FTG Mode configuration,
a channel banner will only be displayed if the Start Channel is
included in the FTG Channel Map. Otherwise, the TV will either
return to the last channel tuned (TV in Pass-through Mode) or
tune to the first channel in the FTG Channel Map (TV in FTG
Mode).
