LG BX27C-SL, Руководство пользователя

Страница: 38 / 76

38
Auto setup
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point
▲▼
buttons to select one of the following options.
Off .......... Input search will not work.
On...........Input search works under the following situation.
-When turning on the projector by pressing the
ON/STAND-BY button on the top control or the
remote control.
-When pressing the AUTO SET button on the
remote control.
-When pressing the AUTO SETUP button on the
top control.
-When the current input signal is cut off.
*If the Blank or Freeze function is active,cancel it to activate
the Input search. It is also unavailable when On-Screen menu is
displayed.
Auto PC adj.
On.............Press Auto Set button on the Top Control or
remote control to enable Auto PC Adjustment
function.
Off ........... Disables Auto PC Adjustment.
Auto Keystone
Off ........... Disables Auto Keystone.
Auto ........
Manual ........Activate this function by presing Auto Set on the
Top Control or the Remote Control.
.Always works and corrects keystone distortion
according to the projector's tilt.

NOTE:
• Only the last selected input source can be
detected.
• If the INPUT button on the top control or
the COMPUTER 1/2 buttons, VIDEO or
S-video or COMPONENT buttons on the
remote control is pressed during Input
search is in progress, Input search will stop
and go back to the previous input signal.
• Input Search , Auto PC Adj. and
Auto Keystone cannot be set Off at the
same time.
• Auto Keystone corrects vertical distortion
only, not correct horizontal distortion.
• Auto Keystone dosen’t work when the
Ceiling On.
• Perfect correction of the image distortion
cannot be ensured with the Auto setup
function. If the distortion is not corrected
properly by pressing the AUTO SETUP
or AUTO SET button, adjust manually by
pressing the KEYSTONE button on the
remote control or selecting Keystone in
the Setting menu.
• Fine sync. , Total dots , Horizontal and
Vertical position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is
not provided properly with this operation,
manual adjustments are required.
This function enables Input search, Auto Keystone correction
and Auto PC adjustment by pressing the AUTO SETUP button
on the top control or the AUTO SET button on the remote
control. Settings for those functions can be altered as follows:
Setting
Keystone Correction
This function is used to store or reset the keystone
correction when the
Point button or SELECT button to access the submenu items.
AC power cord is unplugged. Press
Use the Point ▲▼ buttons to switch between each option.
Store ...... ...... Keep the keystone correction even when
the AC power cord is unplugged.
Reset ............ Release the keystone correction when the
AC power cord is unplugged.
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point
▲▼
buttons to correct keystone distortion.
Blue back
Select the background screen for when no input
signal is detected. Press the Point ▲▼ buttons
to switch between each option.
On On.............. Display Blue background
Off.............. Display Black background
●
please use the keystone manually when the
auto keystone can not adjust the image
square perfectly.
•
mark on if there is nothing to do of
the auto set up key.
▲