LG AS35GVGG0, Руководство пользователя

Страница: 20 / 23

TROUBLESHOOTING BEFORE CALLING FOR SERVICE
20
ENGLISH
TROUBLESHOOTING BEFORE CALLING FOR SERVICE
Symptom Check Actions
It does not
start at all.
• Isn’t the power plug pulled
out?
• Isn’t the voltage too low?
– Insert correctly into the socket.
– Check if it is 230 V.
Wind amount
is small and
there is a
noise.
• Is the Dual Protection Filter
clogged?
• Is dust accumulated on the
allergy HEPA filter?
– Clean the Dual Protection Filter.
– Replace the allergy HEPA filter.
Air purifica-
tion does not
work well.
• Is the indoor contamination
severe?
• Is dust accumulated on the
dual protection filter?
• Is dust accumulated on the
allergy HEPA filter?
• Isn’t the usage place too
wide?
• Are there obstacles nearby?
• Is the product installed in a
corner?
– Ventilate first before usage.
– Clean the dual protection filter.
– Replace the allergy HEPA filter
– Use the product appropriate for the
usage area. (Avoid places with fluent ven-
tilation such as entrance, window, etc.)
– Please remove obstacles.
– Please change the installation loca-
tion.
There is a
strange odor
coming out of
air outlet.
• Is it used at a place with a lot
of smoke or odor?
• Is there abnormal odor from
the Triple Care Filter?
– The air cleaning function may be de-
graded where there are a lot of
smoke or odor. Please use the Air Pu-
rifier after ventilation.
– Please replace the Triple Care Filter.
There is an
odor, but the
Indicator lamp
does not
change.
• Isn’t red light turned on in
the Indicator lamp?
– Indicator lamp indicates the cleanli-
ness through the odor sensor. Odor
sensor may not respond to food odor
since it is a sensor detecting contam-
ination gas. But the odor is removed
by the deodorization filter.
The Indicator
lamp is contin-
uously on with
red color.
• Doesn’t the color change
even if it is moved to a clean
room?
• Did you use spray near the
Air Purifier?
– If the quantity of odor is greater than
the ability that can be processed by
the Air Purifier, the display may not
change.
– Do not use sprays near the Air Puri-
fier.
Button does
not work well. • Is the lock lamp on the oper-
ation part turned on?
– Push Ionizer & Sleep button for 3
sec. to reset the lock setting.