background image

Safety Precautions

Operating Instructions

Care and Maintenance

Troubleshooting Tips

3

CAUTION

CAUTION

WARNING

WARNING

Never touch the metal parts
of the unit when removing
the filter.

Do not clean the air
conditioner with water.

Ventilate well when used
together with a stove, etc.

• They are sharp and may cause

injury.

• Water may enter the unit and

degrade the insulation. It may
cause an electric shock.

• An oxygen shortage may occur.

When cleaning the unit,
first make sure the power
and breaker are turned off.

Do not put a pet or house
plant where it will be
exposed to direct air flow.

Do not use appliance for special
purpose such as animals or
vegetables, precision machine,
or conservation of art articles.

• Since the fan rotates at high

speed during operation, it may
cause injury.

• This could injure the pet or

plant.

• It may cause damage of animals

or vegetables or loss of
property.

Stop operation and close
the window in storm or
hurricane.

Hold the plug by the head of
the power plug when taking
it out.

Turn off the main power
switch when not using it for
a long time.

• Operation with windows opened

may cause wetting of indoor and
soaking of household furniture.

• It may cause electric shock and

damage.

• It may cause failure of product

or fire.

Do not place obstacles
around the absorption inlet or
instead of blowing-out inlet.

Ensure that an installation console of
the outdoor appliance is not damaged
due to the use for a long time.

Always insert the filters
securely. Clean it once
every two weeks.

• It may cause failure of appliance

or accident.

• If leaving appliance damaged,

there is concern of damage due
to the falling of product.

• Operation without filters may

cause failure.

Do not use strong detergent
such as wax or thinner but
use a soft cloth.

Do not place heavy object on the
power cord and take care so that
the cord should not be pressed.

Do not drink water drained
from air conditioner.

• Appearance may be deteriorated

due to change of product color or
scratching of its surface.

• There is danger of fire or electric

shock.

• It contains contaminants and will

make you sick.

Ventilate before operating air conditioner
when gas goes out.

Do not disassemble or modify products
randomly.

• It may cause explosion, fire and, burn.

• It may cause failure and electric shock.

Use caution when unpacking and installing.
Sharp edges could cause injury.

If water enters the product, turn the power
switch of the main body of appliance off. After
taking the power-plug out from the socket,
contact with the service center.

ENGLISH

Содержание AS-C076 Series






















Отзывы: