background image

Owner's Manual 

5

Safety Precautions

ENGLISH

Use a dedicated outlet for
this appliance. 

• There is risk of fire or electrical

shock.

Grasp the plug to remove
the cord from the outlet. Do
not touch it with wet hands. 

• There is risk of fire or electrical

shock.

Do not place a heater or
other appliances near the
power cable. 

• There is risk of fire and electric

shock.

Do not allow water to run
into electric parts. 

• It may cause  There is risk of

fire, failure of the product, or
electric shock.

Do not store or use
flammable gas or
combustibles  near the air
conditioner.  

• There is risk of fire or failure of

product.

Do not use the product in a
tightly closed space for a
long time. 

• Oxygen deficiency could occur.

When flammable gas leaks,
turn off the gas and open a
window for ventilation
before turn the product on.
DO NOT use the telephone
or turn switches on or off.  

• There is risk of explosion or fire.

Unplug the unit if strange
sounds, odors, or smoke
comes from it. 

• There is risk of electrical shock

or fire

Stop operation and close
the window in storm or
hurricane. If possible,
remove the air conditioner
from the window before the
hurricane arrives.  

• There is risk of property

damage, failure of product, or
electric shock.

Wa

x

Thinner

Содержание ARTCOOL LAN091HNP
































Отзывы: