background image

 5

Safety

Due to our policy of continuous product innovation, some specifications may change without notification.

Single Zone Art Cool Mirror

safety instruCtiOns

installation safety

• 

Do not install the air conditioner on an unstable surface or where 

there is a danger of it falling; because it may result in death, serious 

injury, and/or product failure.

• 

Contact an authorized service center when you install or relocate 

the air conditioner. Failure to do so may result in serious injury and/

or product failure.

• 

Indoor/outdoor wiring connections must be secured tightly and the 

cable should be routed properly so that there is no force pulling the 

cable from the connection terminals. Improper or loose connections 

may cause heat generation or fire.

• 

Install the panel and the cover of the control box safely. Failure to do 

so may result in explosion or fire.

• 

Do not install the air conditioner near a place with a danger of explo-

sion or fire; because it may result in serious bodily injury or death.

• 

Ensure that the pipe and the power cable which connect the indoor unit 

and the outdoor unit are not pulled tight when installing the air condi-

tioner. Failure to do so may result in electric shock or product failure.

• Do not mix air or gas in the system except for the specific refrigerant. 

If air enters the refrigerant system, it may result in excessively high 

pressure that may lead to personal injury or damage to the equipment.

• 

Safely dispose of packing materials such as screws, nails or batter-

ies in a packing bag after installation or repair. Failure to do so may 

result in serious bodily injury. 

• 

Use caution when unpacking or installing the air conditioner. Failure 

to do so may result in bodily injury or product failure.

• 

When lifting or transporting the equipment, there should be 2 or 

more people, or a forklift. Failure to do so may result in bodily injury.

• 

Avoid exposure to leaking refrigerant which may occur during instal-

lation or repair. Failure to do so may result in personal injury and/or 

product failure.

• 

If there is a refrigerant leak during the installation of the air condi-

tioner, ventilate the area immediately. Failure to do so may result in 

serious injury and/or product failure.

• 

Do not install air conditioner with direct exposure to sea water or sea 

wind (salt spray); because it may result in product failure.

• 

Install the drain hose properly for smooth drainage of condensed 

water. Failure to do so may result in product failure.

usage

• 

Use only those parts which are listed in the service parts list. Never 

attempt to modify the equipment; because that may result in death, 

serious injury, and/or product failure.

• 

Discard the batteries in a safe manner and where there is no danger of 

excessive heat or fire. Failure to do so may result in explosion or fire.

• 

Contact an authorized service center when the air conditioner is 

submerged into water due to flooding. Failure to do so may result 

in explosion or fire.

• 

Only use components that are approved by the manufacturer and do 

not repair or modify them; because that may result in electric shock 

and/or product failure.

• 

Only use the refrigerant specified on the air conditioner label. Failure 

to do so may result in explosion or fire.

• 

Do not allow water to run into the air conditioner; because it may 

result in explosion or fire.

• 

Do not leave flammable substances such as gasoline, benzene and 

other white spirits or solvents, including thinner near the air condi-

tioner because; it may result in explosion or fire and may result in 

bodily injury.

• 

Do not use the air conditioner for an extended period of time in a 

small place without ventilation; because it may result in explosion or 

fire. Make sure to ventilate the space regularly.

• 

Do not touch the electrostatic filter after opening the front grill; be-

cause it may result in electric shock or product failure.

• 

For inner cleaning, contact an authorized service center or a dealer. Do 

not use harsh detergent that causes corrosion or damage on the unit; 

because it may cause product failure, fire, and/or electronic shock.

• 

Disconnect power if there is a noise, smell or smoke coming from the 

air conditioner. Failure to do so may result in explosion or fire.

• 

Ventilate room or area when air conditioner and a heating appliance 

such as a heater are used simultaneously. Failure to do so may re-

sult in fire, serious injury, and/or product failure.

• 

Make sure that children do not climb up the outdoor unit or impact it. 

Failure to do so may result in death, bodily injury and/or product failure.

• 

If there is a gas leak, ventilate area sufficiently before using the air 

conditioner again. Failure to do so may result in explosion or fire.

• 

Do not use the product for special purposes, such as preserving 

foods, works of art, etc.; because it may result in death, fire and/

or electric shock. The product is a consumer air conditioner, not a 

precision refrigeration system.

• 

Do not block the inlet or outlet of air flow; because it may result in 

explosion or product failure.

• 

Do not insert hands or other objects through the air inlet or outlet 

while the air conditioner is operating; because it may result in per-

sonal bodily injury or electric shock.

Содержание Art Cool LA240HSV2

























Отзывы: