Installation Manual
15
Installation
ENGLISH
GND
Signal
12 V
LGAP Network System
Master
Master
Slave
Slave
Donʼt connect serial 12V line
or
Display Error Message
Master
Master
h
It is possible to connect indoor units since Feb. 2009.
h
It can be the cause of malfuctions when there is no setting of master and slave.
h
In case of Group Control, it is possible to use following functions.
- Selection of operation, stop or mode
- Temperature setting and room temperature check
- Current time change
- Control of flow rate (High/Middle/Low)
- Reservation settings
It is not possible to use some functions.
h
It is possible to control 16 indoor units(Max.) with the master wired remote control.
h
Other than those, it is same with the Group Control 1.
2. Group Control 2
n
Wired remote contr Standard Indoor Units
