background image

Maintenance and Service

14

Indoor Unit

Before you call for service...

?

Check the following points before requesting repairs or service.... If the malfunction persist,
please contact your dealer.

Troubleshooting Tips! Save time and money!

• Have you made a

mistake in timer
operation?

• Has the fuse blown

or has the circuit
breaker been
tripped?

• Check that this is not

a damp smell exuded
by the walls, carpet,
furniture or cloth
items in the room.

• Condensation occurs

when the airflow from
the air conditioner
cools the warm room
air.

• This is the protector

of the mechanism.

• Wait about three

minutes and
operation will begin.

The air conditioner

does not operate.

The room has a

peculiar odor. 

It seems that

condensation is

leaking from the air

conditioner.

Air conditioner does

not operate for about

3 minutes when

restart.

Does not cool or heat

effectively.

The air conditioner

operation is noisy.

Crack sound is

heard.

Remote control

display is faint, or no

display at all.

• Is the air filter dirty?

See air filter cleaning
instructions.

• The room may have

been very hot when
the room air
conditioner was first
turned on. Allow time
for it to cool down.

• Has the temperature

been set incorrectly?

• Are the indoor unit's

air inlet or outlet vents
obstructed?

• For a noise that

sounds like water
flowing.

-This is the sound of

freon flowing inside
the air conditioner
unit.

• For a noise that

sounds like the
compressed air
releasing into
atmosphere.

-This is the sound of

the dehumidifying
water being
processed inside the
air conditioning unit.

• This sound is generated

by the expansion/
constriction of the front
panel, etc. due to
changes of
temperature.

• Cleaning the filter,

press the Timer button
and 

button of wired

remote controller at
the same time for 3
sec.

• Are the batteries

depleted?

• Are the batteries

inserted in the
opposite (+) and (-)
directions?

WATER RESISTANT: The outdoor side of this appliance is WATER RESISTANT.

The indoor side is not water resistant and should not be exposed to
excess water.

NOTICE

Filter sign lamp

(LED) is ON.

Содержание ARNU12GTJC1
















Отзывы: