LG APNQ55GT3M2, Руководство пользователя

Страница: 22 / 30

22
OPERATING INSTRUCTIONS
ENGLISH
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously
dehumidifier and cooling mode to remove
humidity effectively.
1
Press
|
button to turn on the indoor.
2
Press
c
button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at
display section for about 5 seconds.
Power Cooling/Heating Mode
Strong cooling/heating will be conducted in
short time.
1
Press
|
button to turn on the indoor.
2
Press
9
/
─
button to operate power
cooling/heating mode.
- When power (cooling/heating) button is
pressed during cooling/dehumidification
mode, power cooling will be operated.
In power cooling mode, desired
temperature is set to 18 °C (Egypt Only
20 °C) and the horizontal louver is fixed at
the highest position.
- When power (cooling/heating) button is
pressed during heating operation, power
heating will be operated.
In power heating mode, desired
temperature is set to 30 °C (Egypt Only
28 °C) and the horizontal louver is fixed at
the lowest position.
Fan Mode
1
Press
|
button to turn on the indoor unit.
2
Press
┌
or
g
button to circulate indoor
air.
- When canceling operation, press
┌
or
g
button once more.
- During fan mode, outdoor fan and
compressor will not be operated.
- During fan mode, indoor unit turns on the
fan mode lamp, room temperature lamp,
and fan speed lamp of its display panel.
Simple Reservation
This function is able to turn on unit after a
setting time.
1
When the unit is turned off, adjust desired
setting time with
S
button.
- Up to the maximum of 24 hours can be
selected.
This function is able to turn off unit after a
setting time.
1
When the unit is turned on, adjust desired
setting time with
T
button.
- Up to the maximum of 7 hours can be
selected.
Turning OFF reservation mode
Turning ON reservation mode
NOTE
After performing the setting, if corresponded
setting button is pressed once, remaining
setting time will be displayed, and if it is
pressed once again, corresponded setting
function will be cancelled. (same function as
Q
) Remaining setting time will be displayed
with the unit of 1 hour.
NOTE
• Some functions may not be supported,
depending on the model.