LG APNQ36GRA1, Руководство пользователя

Страница: 13 / 23

OPERATING INSTRUCTIONS
ENGLISH
13
Dehumidification Mode
In rainy season or high humidity climate, it is
possible to operate simultaneously dehumidi-
fier and cooling mode to remove humidity ef-
fectively.
1
Press
|
button to turn on the indoor.
2
Press
c
button to select dehumidification
mode
- Room temperature will be displayed after
desired temperature is indicated at dis-
play section for about 5 seconds.
Power Cooling Mode
Strong cooling will be conducted in short time.
1
Press
|
button to turn on the indoor.
2
Press button to operate power cooling
mode.
- When power cooling button is pressed
during cooling/dehumidification mode,
power cooling will be operated. In power
cooling mode, desired temperature is set
to 18 °C and the horizontal louver is fixed
at the highest position.
Fan Mode
1
Press
|
button to turn on the indoor.
2
Press button to circulate indoor air.
- When canceling operation, press
|
but-
ton once more.
- During fan mode, outdoor fan and com-
pressor will not be operated.
Auto Operation Mode
1
Press
|
button to turn on the indoor.
2
Press
2
button to select Auto Operation
Mode.
3
Adjust the desired temperature by press-
ing (
) buttons.
- When room temperature is higher than
desired temperature, cooling operation
will be performed.
- The temperature established by customer
will be maintained through automatic per-
formance of cooling operation in accor-
dance with the change of room
temperature.
Simple Reservation
Turning ON reservation mode
This function is able to turn on unit after a set-
ting time.
1
When the unit is turned off, adjust desired
setting time with button.
- Up to the maximum of 24 hours can be
selected.
Turning OFF reservation mode
This function is able to turn off unit after a set-
ting time.
1
When the unit is turned on, adjust desired
setting time with button.
- Up to the maximum of 7 hours can be se-
lected.
NOTE
!
After performing the setting, if corresponded
setting button is pressed once, remaining set-
ting time will be displayed, and if it is pressed
once again, corresponded setting function will
be cancelled. (same function as ) Remaining
setting time will be displayed with the unit of 1
hour.