LG AKWW0093AA0, Руководство по установке

Страница: 18 / 29

18 Water Cooled Package
Installation
WARNING: Loose wiring may
cause the terminal to overheat or
result in unit malfunction. A fire
hazard may also exist. Therefore,
be sure all wiring is tightly
connected.
When connecting each power wire to the
corresponding terminal, follow instructions "How
to connect wiring to the terminals" and fasten
the wire tightly with the fixing screw of the
terminal plate.
How to connect wiring to the
terminals and the manual controllers
switch
For strand wiring
(1) Cut the wire end with a wire cutter or wire-
cutting pliers, then strip the insulation to
expose the strand wiring about 10mm(3/8").
(2) Using a screwdriver, remove the terminal
screw(s) on the terminal (manual controllers
switch) plate.
(3) Using a round terminal fastener or pliers,
securely clamp each stripped wire end with
a round terminal.
(4) Position the round terminal wire, and replace
and tighten the terminal screw using a
screwdriver.
Connection method of the connecting cable(Example)
High voltage
Low voltage
Str
ip 10mm(3/8")
Round
terminal
Connecting cable
Loosening the
terminal block
screw Fastening the
wire tightly
Strand wire
Connecting cable
Loosening the
terminal block
screw Fastening the
wire tightly