25
OPERATION
ENGLISH
Control Panel
Control Panel Features
a
Power
On/Off Button
• Press this button to turn the washer on or off.
• After the cycle is complete, the power automatically turns off for purposes of safety and economy.
• If there is a power surge, power outage, or disruption of any kind, power is automatically turned off
for safety.
• When power is connected again, the dishwasher will turn on automatically and resume the cycle.
b
Display
•
e
:
Rinse Aid Icon
- This icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse
aid is refilled or the level is set to 0.
- Refer to the
Rinse Aid Dispenser Adjustment
section.
•
a
:
Machine Clean
- The
Machine Clean
icon flashes every 30 cycles. To activate or deactivate the icon, press the
Delicate
button for three seconds.
- If the
High Temp.
option is added to a cycle, the
Machine Clean
icon stays lit at the end of the cycle
if the dishes were properly sanitized.
•
8:88
:
Digital Display
- The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and
options are selected, the display shows the total estimated time to complete those selections.
During operation, the display shows the remaining estimated operating time.
NOTE
• The estimated time shown on the display does not include delay times for heating water, etc.
• If
Delay Start
is selected, the display shows the delay time in hours.
• Cycle time may vary depending on the soil level of your load.
•
CL
:
Control Lock
- The
Control Lock
feature helps prevent settings from being changed during a cycle. Selecting this
feature locks all of the buttons, except for the
Power
button, on the control panel. This feature
does not lock the door.
- While a cycle is running, press and hold
Half Load
and
Energy Saver
simultaneously for three
seconds to activate or deactivate
Control Lock
.
- To start a new cycle, deactivate
Control Lock
.
Содержание ADFD544 Series
Страница 58: ...58 Memo ...
Страница 59: ...59 Memo ...