background image

22

MAINTENANCE

NOTE

• The dust bag door will not close without a dust 

bag. Discard the dust bag and be sure to put a 

new dust bag in place.

• Replace the dust bag every month to maintain 

the dust emptying performance. The 

replacement cycle may vary depending on the 

environment, and may be especially short in 

conditions with a lot of dust or pet hair.

• Replace the dust bag if it smells, even if it is not 

full.

• The motor protection filter will eventually need 

to be replaced. Contact an LG Electronics 

customer service center.

Cleaning the Filters

Clean the motor protection filter and the exhaust 

filter every 3 months or sooner if the dust 

emptying function seems weaker.
• Clean the filters more frequently if the appliance 

is used regularly or in areas with a lot of dust.

CAUTION

• Do not use the appliance without the exhaust 

filter and the motor protection filter installed. 

Doing so could result in product damage.

Open the left and right component storage 

doors.

Hold the product with one hand and open the 

dust bag door with the other hand.

Hold the product with one hand and take out 

the motor protection filter with the other 

hand.

To remove the exhaust filter, hold the bottom 

of the product and pull the handle end of the 

filter.

Содержание A9 Series





































































Отзывы: