636
11
Basic Phone Operation
Turning the Phone On and Off
Turning the Phone On
1) Install a charged battery pack or connect the phone
to an external power source such as the car kit or AC
Adaptor.
2) Hold down the Key
for 2 seconds until the LCD
screen flashes.
N
No
otte
e
As any other communication device, avoid any
unnecessary contact with the antenna while your
phone is turned on.
Making a Call
Every time you make a call, follow these steps:
1) Make sure that the phone is turned on. If not, hold
down
for 2 seconds.
2) Type the phone number and then press
.
• If the phone is locked, type the lock code
3) To end the call press
.
N
No
otte
e
In no service area,
appears from the
screen. When trying voice call in no service area,
“Call could not be completed. Please try again” is
displayed. It means you are in no service area.
Receiving Calls
1) When the phone rings or vibrate (if the Vibrate Mode
is enabled), press any key (except
) or
depending on the Call settings.
• When you press
once, when a call is
received, the phone stops ringing or vibrating
depending on the mode it is in.
2) To end an answered call press
.
On pressing the
key for the first time, when the
call is received, the phone stops ringing or vibrating
depending on the mode it is in. Pressing
key
after that does not disconnect the call.
Signal Strength
If you’re inside a building, being near a window may give
you better reception. You can see the strength of your
signal by the signal indicator (
) on your phone’s
display screen.
UD636_Eng.qxd 4/18/06 9:15 AM Page 11
