28
ENG
ENGLISH
REMOTE CONTROL
Registering Magic Motion
remote control
It is necessary to ‘pair’ (register) the Magic Motion
remote control to your TV before it will work.
How to register the Magic Motion remote control
To register the remote control, press the
OK
button
on the remote control while aiming it at your TV.
How to re-register the Magic Motion remote
control after registration failure
Reset the remote control by pressing and holding
both the
OK
and
MUTE
buttons for 5 seconds.
(Once the reset is complete, the light on the
pointer blinks.) Then repeat the above procedure
to register the remote control.
1
Press
OK
button if there is no pointer on your
TV screen. The pointer will then appear on the
screen.
If the pointer has not been used for a certain
period of time, it will disappear.
2
You can move the pointer by aiming the Pointer
Receiver of the remote control at your TV then
move it left, right, up or down.
If the pointer does not work properly after
clicking the
OK
button, leave the remote
control for 10 seconds then use it again.
How to use Magic Motion
Remote Control
Precautions to Take when
Using the Magic Motion
Remote Control
y
y
Use the remote control within the maximum
communication distance (10 m). Using the
remote control beyond this distance, or with an
object obstructing it, may cause a
communication failure.
y
y
A communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as this will use the same
bandwidth (2.4 GHz) as the Magic Motion
Remote Control.
y
y
The Magic Motion Remote Control may be
damaged or may malfunction if it is dropped or
receives a heavy impact.
y
y
When playing a game using the Magic Motion
Remote Control, hold it securely by wrapping
its strap around your wrist and adjusting the
length with the adjustable ring.
y
y
Take care not to bump into nearby furniture
or other people when using the Magic Motion
Remote Control.
y
y
Manufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
y
y
It is recommended that an Access Point (AP)
be located more than 1 m away from the TV. If
the AP is installed closer than 1 m, the magic
motion remote control may not perform as
expected due to frequency interference.
Содержание 60PZ570T
Страница 3: ...3 ENG ENGLISH LICENSES ...