14
ENGLISH
How to Join Sets
1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
2
Adjust the spacing between the sets using the tiling guide, and remove the protective sheet.
3
Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
•
The load applied to each set should be supported by the wall mount plate or the wall using a VESA wall
mount (600 x 400).
•
The load applied to each set should be supported by the wall mount plate using a VESA wall mount. (Each
set must be firmly mounted to the wall mount plate or the wall.)
•
You may mount the set without using the tiling guide; this does not affect the performance of the device.
•
The screws are enclosed with the other components in the box, including the tiling guides.
NOTE
•
Lay the protective sheet on top before installing additional sets.
•
Failure to lay the protective sheet on top before installing additional sets may result in damage to the panel.
CAUTION
(M4 x L6)
