DPM Wakeup Control
•
Turns on the monitor set according to the digital signal processing of the connected DVI/HDMI port.
•
Setting this option to Clock only checks for the signals from the digital clock. If there is a clock signal, the monitor set
is turned on.
•
Setting this option to Clock+DATA turns on the monitor set only when there are both digital clock signal and data
signal inputs.
Baudrate (9600/115200)
•
You can change the RS-232 communication speed for controlling your monitor.
•
You can choose 9600 or 115200.
•
If you set this option to 9600, the RS-232 communication speed is set at 9600 bps.
•
If you set this option to 115200, the RS-232 communication speed is set at 115200 bps.
OSD Portrait Mode (Off, 90, 270)
•
This feature allows you to rotate the OSD clockwise.
•
You can set this feature to Off/90/270.
•
If you set this feature to Off, the feature is disabled.
•
If you set this feature to 90, the OSD rotates 90 degrees clockwise. In this case, the mouse cannot be used.
•
If you set this feature to 270, the OSD rotates 270 degrees clockwise. In this case, the mouse cannot be used.
•
Depending on the model, you can set this feature to Off/On. If you set this feature to On, the OSD rotates 90 degrees
clockwise.
•
The set must be restarted for the changed settings to be applied in some models.
Power On Delay (0 ~ 250)
•
This feature delays power on in order to prevent overload when multiple monitor sets are turned on simultaneously.
•
You can set the delay interval in the range of 0 to 250 seconds.
Check Screen
•
The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs are
formed on the screen at one second intervals and an RGB Sensor tests the areas.
•
If set to On, the Check Screen feature is enabled.
•
If set to Off, the Check Screen feature is disabled.
•
If Portrait mode or Pivot mode is set to On, Check Screen is changed to Off and disabled.
Digital Audio Input
•
HDMI/DISPLAYPORT/OPS: You can hear the sounds of the digital signals carried by HDMI, DISPLAYPORT, or OPS
through the monitor speakers.
•
Audio In: you can hear sounds through the monitor speaker by connecting HDMI, or OPS or DISPLAYPORT ports to
the Audio In port.
•
If Digital is selected in DVI-D when using OPS/HDMI3/DVI-D or OPS/DVI-D input, there will be no sound.
•
Models that do not support internal speakers require external speakers.
ENGLISH
7
