background image

- 13 -

LGE Internal Use Only

Copyright © 2011 LG Electronics. Inc. All rights reserved.
Only for training and service purposes

4.3.7. ALELF & EDGE LED White banlance table

- ALELF&EDGE LED module change color coordinate

because of aging time.

- Apply under the color coordinate table, for compensated

aging time.

- ALEF - LGD Only

4.4. Wireless function check

Step 1) Connect set and Dongle of Wireless to Cable of HDMI

& TTA 20Pin.

Step 2) At OSD of SET, check the message like Fig 3.
Step 3) Detach Cable of Wireless Dongle.

4.5. EYE-Q function check

Step 1) Turn on TV.
Step 2) Press EYE key of Adjustment remote control.
Step 3) Cover the Eye Q II sensor on the front of the using

your hand and wait for 6 seconds.

Step 4) Confirm that R/G/B value is lower than 10 of the “Raw

Data (Sensor data, Back light)”. If after 6 seconds,
R/G/B value is not lower than 10, replace Eye Q II
sensor.

Step 5) Remove your hand from the Eye Q II sensor and wait

for 6 seconds.

Step 6) Confirm that “ok” pop up. If change is not seen,

replace Eye Q II sensor.

4.6. Local Dimming Function Check

Step 1) Turn on TV.
Step 2) At the Local Dimming mode, module Edge Backlight

moving right to left Back light of IOP module moving.

Step 3) Confirm the Local Dimming mode.
Step 4) Press “exit” key.

4.7. Magic Motion Remote control test

- Equipment : RF Remote control for test, IR-KEY-Code

Remote control for test

- You must confirm the battery power of RF-Remote control

before test(recommend that change the battery per every lot) 

- Sequence (test)

1) if you select the ‘start(Mute)’ key on the controller, you

can pairing with the TV SET.

2) You can check the cursor on the TV Screen, when select

the ‘OK’ key on the controller.

3) You must remove the pairing with the TV Set by select

‘OK’ Key + ‘Mute’ key on the controller for 5 seconds.

Aging Time

Cool

Medium

Warm

GP3

(Min.)

X

Y

X

Y

X

Y

269

273

285

293

313

329

1

0-2

282

294

298

314

322

343

2

3-5

281

292

297

312

321

341

3

6-9

280

291

296

311

320

340

4

10-19

279

289

295

309

319

338

5

20-35

277

284

293

304

317

333

6

36-49

274

279

290

299

314

328

7

50-79

271

277

287

297

311

326

8

80-149

270

274

286

294

310

323

9

Over 150

269

273

285

293

309

322

Fig.1 

Fig.3 Connect the Dongle  

Fig.2 

Connect

Local Dimming Demo (Edge LED Model)

Local Dimming Demo (IOP & ALEF Model)

Содержание 55LW9500




















































































































Отзывы: