MOTION REMOTE BOARD SECTION
The first time the Motion Remote has it’s batteries installed
and pointed at the Television, the Motion Remote is
s nchroni ed ith the TV After that
hen pointing the
synchronized with the TV. After that, when pointing the
remote at the TV and pressing the Enter key, a pointer
appears on screen, then by moving the Motion Remote
around, the pointer moves with the movement of the
remote. When the pointer is placed over a selectable
button you can press the center “Enter” button and
button, you can press the center Enter button and
active the object. This makes navigation much easier.
You can also adjust the volume, change channels and mute
the audio with the Motion Remote and it has a
convenient “Home” button for the TV Menu.
A wrist band can be attached to the remote to avoid dropping
and damaging the remote.
The Motion Remote utilizes a specialized receiver on the
Television to receive the RF signal and this information
Television to receive the RF signal and this information
is then routed to P1302 and on to the IC101 the BCM IC
for pointer positioning and interpretation of the other
functions.
How to
Re-register the Magic Motion Remote
Control after Registration Failure. Reset the
remote control by pressing and holding both the
ENTER
and
MUTE
buttons for
5 seconds
.
An LED will blink 3 times indicating the remote is ready for registering.
July 2011 LCD TV
55LW56000
92
Motion Remote “Magic Remote” AKB72914043
